Close window | Table of Contents | Home | Contact us | Recommend us
  

I - Industrial And Energy Supply Plants

AL SHEMAL THERMO-ELECTRIC POWER PLANT - Mosul, Iraq

Construction information


Designed by: "Energoprojekt", "Eniel" 
Main Designer: Petar Kocovic, BSc (arch.)
Main Designers of individual stages: Petar Kocovic, BSc (arch.) and Miomil Obradovic, BSc (arch.) for architectural part; Marina Gozze-Gucetic, BSc (civil eng.) for civil engineering; Igor Ginsberg, BSc (mech.) and Jaroslav Grosevic, BSc (mech.) for electrical part; and Mirjana Pekovic, BSc (mech.) for mechanical part.
Main Contractors: "Energoprojekt" (for civil engineering) and FOCHI -Italy (erection works).
Equipment Suppliers: Nei Parsons, UK (turbines); G.I.E., Italy (boilers); Siemens (measuring and control equipment); ABB - Sweden (cables and distribution boards); Fochi, Italy (fuel system); PWT Portals, UK (water preparation plant)
Employer: Ministry for Industry and Minerals
Years of Construction: 1988 project still under construction)
  

Project information

 
THERMAL POWER station "Al Shemal" is situated on the river Tigris, 20 km south of the town of Mosul in Iraq. The total capacity is 2,100 MW and it consists of 6 blocks, each of 350 MW capacity.

§ The first stage of the construction included four blocks.

§ The main plant consists of a boiler (on crude oil and natural gas) and turbines (condenser type with river water cooling). Each boiler is connected to one turbine.

§ The boiler plant consists of a vertical boiler with natural circulation and steam pre-heating, and its own chimney.

§ The turbine plant is of condenser type with one pre-heating and 7 reductions for heating of the main condensate and feed water, out of which one is on the high pressure cylindre, three on the medium and three on the low pressure cylinder. The pail of the low pressure turbine is with two flows of symmetrical type. The turbine and the generator are placed on the same level.

§ The condenser plant consists of one surface condenser with double flow and auxiliary equipment. The cold water flow is 10,000 l/s.

§ The basic characteristics are: 
- total area of the complex 100 ha, 
- total capacity 2,100 MW,
- 6 blocks 350 MW each, 
- type of fuel: crude oil/natural gas,
- maximum flow of cooling water 10,800 1/s,
- cooling water temperature: max 35°, processing 25°, min 15°, 
- other buildings: administrative office building, restaurant, clinic, water tower, mosque.
     

Related photos

Industrial And Energy Supply Plants - AL SHEMAL THERMO-ELECTRIC POWER PLANT - Mosul, Iraq
Industrial And Energy Supply Plants - AL SHEMAL THERMO-ELECTRIC POWER PLANT - Mosul, Iraq
Industrial And Energy Supply Plants - AL SHEMAL THERMO-ELECTRIC POWER PLANT - Mosul, Iraq

©2001 - 2006 YUBuild Group. All rights reserved. Legal information.
E-mail our webmaster if you have questions or problems regarding this Web site.